Activate God mode in Windows:-
Enable God Mode In Windows 7 And Vista windows God mode

How to do it ?

1. On your desktop right click and create a New Folder.

2. Rename this folder to the code given below.

GodMode.{ED7BA470-8E54-465E-825C-99712043E01C}

3. Done now double click on this folder and you will have access to all your windows operating system settings.
_________________________

Open COMMAND PROMPT while Locked by User
>open notepad

>type www.command.com

> then save as cmd.bat at desktop

>then enter now its open…..enjoy

>>If your computer is slow?

then clean up the ram..

>Open notepad

>type FREEMEM=SPACE(64000000)

>Save it as ram.vbs

now run the script.

Check out !!
_________________________

Reset BIOS Password
>Open the CPU

>Observe the Motherbord

>Remove the Silver Battery(3v)

>Wait 2 minutes and place the Battery

>>Restoring a Lost Desktop-

>Start

>Run

Type a period

Then press Enter
_________________________

create folder without name
>select any folder

>rename it

>press alt & type 0160 or 255

>enter
_________________________

Amazing trick for use
>Windows Backup Utility if installed

go to run

type ntbackup

ok

Now use backup
_________________________

Turning off the Help on Min, Max, Close Icons When the mouse goes over icons on the upper right hand side of a window
To disable that display:

1. Start Regedit

2. Go to HKEY_CURRENT_USER Control Panel Desktop

3. Create a String Value called MinMaxClose

4. Give it a value of 1

5. Reboot
_________________________

FIX CORRUPTED FILE IN WINDOW XP
1.Load XP cd into cd drive

2. go to Run

3. type sfc/scannowok

4. Then copy its lost file frm cd.

>>AUTO DELETE TEMPORARY FOLDER.!!

what i prefer is %temp% without quotes.. at Start -> Run.. this opens ur temp folder n den u cal erase it nearly

First go into gpedit.msc

Next select -> Computer Configuration/Administrative Templates/Windows Components/Terminal Services/Temporary Folder

Then right click Do Not Delete Temp Folder Upon Exit

Go to properties and hit disable. Now next time Windows puts a temp file in

that folder it will automatically delete it when its done! Note from Forum Admin: Remember, GPEDIT (Group Policy Editor) is only available in XP Pro.
_________________________

Turning off the Help on Min, Max, Close Icons When the mouse goes over icons on the upper right hand side of a window
To disable that display:

1. Start Regedit

2. Go to HKEY_CURRENT_USER Control Panel Desktop

3. Create a String Value called MinMaxClose

4. Give it a value of 1

5. Reboot
_________________________

Turning off the Help on Min, Max, Close Icons When the mouse goes over icons on the upper right hand side of a window
To disable that display:

1. Start Regedit

2. Go to HKEY_CURRENT_USER Control Panel Desktop

3. Create a String Value called MinMaxClose

4. Give it a value of 1

5. Reboot
_________________________

HIDE DRIVES
How to Hide the drives(c:,d:,e:,a:…etc)

To disable the display of local or networked drives when you click My Computer.

1.Go to start->run.Type regedit.Now go to:

HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPolicies Explorer

2.In the right pane create a new DWORD item and name it NoDrives(it is case sensitive).

3.Modify it’s value and set it to 3FFFFFF (Hexadecimal) .

4.Restart the computer.

5.Now when you click on My Computer, no drives will be shown(all gone…).

To enable display of drives in My Computer, simply delete this DWORD item that you created. Restart your computer. All the drives are back again.
_________________________

Show your name in taskbar
Trick to Show Your name after time in taskbar…

Try this trick to add up ur name in place of AM and PM beside time Its simple

Step-1:- Navigate to -> Start -> Control Pannel -> Regional and Language Option -> Click on Customize -> Go to TIME Tab -> Change AM symbol and PM symbol from AM and PM to ur name -> Apply -> Ok …

Did It change? If not, follow step-2 below.

Step2:- Now go to time in taskbar and Double Click it to open Date and time property …Look place where time changes in digital form i.e. 02:47:52 AM , click to arrow to change the AM or PM by selecting and press arrow. It will Show ur name or name that was entered by u, Apply -> OK

Done
_________________________

Remotely use other pc using their IP address
Steps to Follow:

Step 1: Now Go to Star and click Run and then type as “CMD” and hit enter. command prompt will open

Step 2: Type in cmd as “nbtstat -a IPaddressOfVictim” and hit enter.

step 3:If you see this your in NetBIOS Remote Machine Name Table

Step 4: Now type as “net use x: IPaddressOfVictimCDISK” and hit enter>

Step 5: Now open windows explorer or just double click on the My Computer icon on your desktop and you will see a new network drive

Now open windows explorer or just double click on the My Computer icon on your desktop and you will see a new network drive X:.
_________________________

Find WiFi Password With CMD
>You can experiment these trick with your neighbors or friends. It’s not necessarily that this trick will work with every wifi because of upgraded hardware.

But you can still try this crack with wifi having old modems or routers.

1: Open command prompt by going to start and click on run command or enter windows+r, then type cmd and hit Enter

2: In command prompt window, type

netsh wlan show network mode=bssid

3: This command will show all the available WiFi network in your area

4: This is the last step. Just type:

netsh wlan connect name=(wifi name )

5: To disconnect it, type

netsh wlan disconnect
_________________________

Copy Data automatically From USB to your PC On Insert
We sometime wish that if someone insert his/her USB Into your pc then its data automatically copy in to your system in hidden Form.

1. open cmd

3. type copy con filename.bat

3. now type “xcopy

i: f:copied /h /s /c /q /i” remove ” ”

4. type Exit

4. press f6

5. now it will create a batch file named filename.bat

xcopy is a command which is used to copy file and folder

i: is the name of your pen-drive drive name replace with your drive name

f:copied is the name of folder where you wish to copied data is to be placed replace with your own folder or path /h is used to copy hidden files also

Now copy this file into desktop now whenever someone insert his/her USB into your system then click on this file his data is automatically copied into the folder specified by you.
_________________________

How To Increase RAM Using Pendrive
>I know it’s old trick, but some people are still not aware of it.

one of my friend asked me today.As you all know what is a basic functionality of RAM on our PC/Laptop as the more RAM means more speed and faster your system’s speed.

#1 Method: Virtual Ram Concept For Windows

Step 1. First of all Insert Your Pen Drive. Then open My Computer and Right click > Then open Properties.

Step 2. Now Properties window will appear, then click on Advanced system settings from a left side.

Step 3. Then in Advanced Tab click on Settings Button appear in Performance tab.

Step 4. Again new window will appear then click on Advanced Tab.

Step 5. In Advanced Tab there is an option of the Virtual Memory box, Then click on Change Button.

Step 6. Now uncheck the box of Automatically Manage Page size feature. Then in Custom Size Add Your Pen Drive current same in below format. Now Add same Value in both boxes and click on Apply button.

Note: If Your Pen Drive is of Size 4Gb then always add 10Mb less from currently available size. As I am using pen drive of size 4Gb and current space available is 3700 Mb then use 3690 minimum approx or remove more as you can because of it better of device safety.
_________________________

How To Remove Write Protection From pendrive or sd card
In this method, we will remove write protection from Pendrive using commands in Cmd.

This will fully clean the write protection of the Pendrive.

Step 1. Click on Start->Cmd. Type Diskpart and press enter.

Step 2. Type list disk.

Step 3. Type select disk 1 and this will select your Sdcard/Pendrive.

Step 4. Now type “attributes disk clear readonly” and press enter.

Now exit from cmd and format your Sdcard/USB Pendrive.

This will remove write protection from your SD card or Pendrive.
_________________________

Is you computer too slow!!! here SOME SOLUTIONS
Temporary files

Step 1. GO to run then type %temp% and temp

Step 2. Delete all these files they are all temporary and unimportant !

Step 3. Do this on a regular basis

I surgest using ccleaner its free and very effective at clearing out your junk

Step 1. Right click on my computer and go to properties.

Step 2. Click the advanced tab and click performance.

Step 3. Tick the box Adjust best for performance.
_________________________

How To Partition A Hard Disk Without Formatting
Steps To Partition A Hard Disk:-

Step 1. Click Start and type “disk mgmt.msg” (without quotes) and pressenter.Now a disk management window will appear.

Step 2. Here you can see all your drives which are being currently available. Choose one of the drives which you want to shrink or extend. Forshrinking a drive and creating a new one there must be some free space on that drive. Now right-click on the drive letter which you want to shrink Or take out free space. Now select shrink volume, and a little process will go on.

Step 3. Here you will see the current size of the drive, free space and size which you want to shrink. Now enter the amount of space which you want to free, note that size should not exceed the free space. Now click shrink button.

Step 4. In disk management window you will see an unallocated space at the right bottom corner. Right-click on it and select New Simple Volume.

Step 5. Now click Next and Enter the size of drive you want to create and click next, next and last Finish. Now a New Volume or Drive will be created with the desired size.

In the same way, you can enlarge the size of any drive when your drive gets overloaded by file, In that case, you can easily make some space unallocated by shrinking it from one drive and then using that space to extend another drive.
_________________________

How to convert a webpage into a PDF file
1. Open any browser (Google Chrome or Mozilla Firefox) on your PC or MAC.

2. Then go to the web page or website that you want to convert .

3. Now press Ctrl+P on Windows PC or Command+P if you are on a Mac to Open the the Print dialog on Chrome Browser (or go to Settings and click on Print).

4. Now Change the destination to “Save As PDF” and hit the save button.

5. The current web page will instantly be downloaded as a PDF document.

If you follow the given steps correctly, then you can also convert those webpages into PDF format within minutes.
_________________________

How To Hide Hard Drive Partition/Whole Hard Disk In Windows XP,7,8/8.1/10
Data Security is a very big issue nowadays.There is no guarantee for that is your data is secured or not.

This Method is done with The CMD.You have to follow just some steps.

Step 1:Go to Start > Run > type “diskpart”.

A DOS window will appear with following commands.

Step 2: Then type “list volume”

Step 3: Suppose you want to hide drive E then type “select volume 4”

Then a message will appear in same window { Volume 4 is the selected volume}

Step 4: Now type “remove letter E”

Now a message will come { Diskpart Removed the Drive letter }

NOTE :To access the content of hidden Drive repeat the process mentioned above. But in 4th step replace ” remove” by “assign”.

It means type “assign letter E”.
_________________________

Method: Finding Current Wifi Password In Windows PC
In Your windows PC press Windows button and then type cmd and then right click on command prompt and then select Run as administrator.

Now command prompt will appear there you need to type netsh wlan show profile name=spyboy key=clear (where you need to replace spyboy with your network name)and hit enter and this will display all details of your wifi network with its password.

If you want only password and not any other details then you need to enter the below command.

netsh wlan show profile name=spyboy key=clear | findstr Key (where you need to replace spyboy with your network name)
_________________________

Stop the Timer while Browsing Internet
Trick to Bypass Timer Restriction in Cyber Café

So the Process Explorer is that application that Suspend few running applications and can resume it instantly if you want too, so we will be using it to do this JOB.

After you have downloaded the process explorer.

Open it up on the cyber café system you are using.

Now you need to search for two running processes “Client.exe” and “Guardit.exe”, as these two are responsible for running that timer.

Now just right on both of them and chooseSuspend.

This terminates the process and hence your timer will be stopped, and you can browse internet without restriction.

After some good time surfing, if you wanna re-enable the timer, you can simply right click once again and choose Resume to start those process again, hence your timer will be started again.
_________________________

Clone USB Drives Easily using Image USB Tool Windows
#1. Creating Image of a USB Drive

In order to develop an image from the USB drive, you need to follow the steps below:

Choose a source USB drive from the list.

Choose Create from UFD choice.

Choose a folder where the image file would be created.

Now click the Create image button

A progress bar would reveal the procedure as it produces the image of the picked USB drive. So just wait and let it create the full image.
_________________________

Share your Mouse and Keyboard between Computers
Have you been in a situation where you using so many computers and you’re fed up using so many keyboards and mouse with different computers well if you are and we have a proper solution for you which is share mouse.

Share mouse is a simple application for Windows and Mac that helps you share your mouse and keyboard between multiple computers.

DOWNLOAD SHAREMOUSE,

It’s even not compulsory that your all computers need to be Windows or Mac as its just necessary that every PC needs to have the small application installed in the computer and connected to that same local network after that everything is good and you up and running.
_________________________

How to Make Wi-Fi Hotspot on Windows using Notepad
>Well now we will be creating simple .bat commands that you can use to start and stop your Wi-Fi Hotspot.

You can change the SSID and even secure it using the KEY. So now lets get started on how its actually done.

Open Notepad and type paste below code into it.netsh wlan set hostednetwork mode=allow ssid=FreeWIFIkey=12345

netsh wlan start hostednetwork

Now you can change the SSID by changing code in blue color and you can change the security code in red color.

Now make sure to save this file asStart.bat and its done.

Now create another new Notepad file and paste below code into it.netsh wlan stop hostednetwork

Save this file as Stop.bat and your Wi-Fi Hotspot stopping process is up.

So now when ever you want to start the Wi-Fi Hotspot simply double click the Star.bat file and your Wi-Fi hotspot will start to broadcast.

As soon as you are done you can double click the Stop.bat file and your broadcast will be stopped.
_________________________

How To Find Open Ports Of Computer System
To find open ports on a computer, you can use netstat command line.

To display all open ports, open DOS command, type netstat and press Enter.

To list all listening ports, use netstat -an |find /i “listening” command.

To see what ports your computer actually communicates with, use netstat -an |find /i “established”

To find specified open port, use find switch. For example, to find if the port 3389 is open or not, do netstat -an |find /i “3389”.

You can use PULIST from the Windows Resource Kit to find which process is using a specified port. For example, pulist |find /i “4125” may display

Process PID User
mad.exe 4125 Chicagotech/blin
_________________________

How To See Hidden Files From CMD
Simple and useful tip at command prompt just type

dir /ah
if the list is too long u can use
dir /ah/p/w

_________________________

How To Make A Super Folder
Want to lock a folder without using any software / password in Windows,

Just follow the steps as given below :-

Go to start> run> cmd

In command prompt,

Type: cacls “path_of_folder” /E /P everyone:n

To regain access

Type: cacls “path_of_folder” /E /P everyone:f

Note: Do not lock C: drive using this trick otherwise Windows will not boot next time.

For example first I created a folder name “TALKTOGAMER” in my D: Drive.Then i run these commands let see what happen.
_________________________

How To Restart Windows Without Restarting Your PC
Hold the Shift key down while clicking on SHUTDOWN button,

you computer would restart without restarting the Computer.

This is equivalent to term “HOT REBOOT”
_________________________

How To Remove Shortcut Arrow From Desktop Icons
You can remove shortcut arrows from your desktop icons.

Just follow the steps as given below :-

1. Start->Run->regedit

2. Navigate to HKEY_CLASSES_ROOTlnkfile

3. Delete the IsShortcut registry value.

You have to restart your computer.
_________________________

How to DISABLE RIGHT CLICK ON THE DESKTOP AND EXPLORER.
STEPS:Open regedit.exe file.

Scroll down to create the following registry key:

[HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPolicies]

In the left side pane,right click on the Policies key and create a new key called Explorer.

Under the Explorer key,in the right pane create a new DWORD value named NoViewContextMenu within the above registry key and set its data value to 1 to disable the right click context menu on the desktop, and to 0 to enable it.

NOTE: You may want to completely delete the DWORD value NoViewContextMenu when you want to enable right click.
_________________________

How to DISABLE THE CONTROL PANEL.
STEPS:Open regedit.exe file.

Scroll down to create the following registry key:

[HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesExplorer]

Under the Explorer key, in the right pane create a new DWORD value named NoControlPanel within the above registry key and set its data value to 1 to disable the windows hotkeys, and to 0 to enable it.

NOTE: You may want to completely delete the DWORD value NoControlPanel when you want to enable control panel.
_________________________

How to PREVENT ACCESS TO CERTAIN DRIVES.
STEPS:Open regedit.exe file.

Scroll down to create the following registry key:

[HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesExplorer]

Under the Explorer key, in the right pane create a new DWORD value named NoViewOnDrive within the above registry key and set its data value to the number of the drive that you want to hide as per the below list:

A: 1 , B: 2 , C: 4 , D: 8 , E: 16 , F: 32 , G: 64 , H: 128 (ALL: 67108863)

NOTE: You may want to completely delete the DWORD value NoViewOnDrive when you want to enable access to certain drives.
_________________________

How to host website on your own pc
Your website using your own home PC , hosting form your PC will give you little bit experience of how hosting services work.

You can try it for small website or personal work.

To run your PC as server there are lot of software but top most popular is WAMP server and XAMP server,Here i’m using WAMP server.

So,Let’s start our hosting :

Here I’m using WAMP server , you can download latest version form here

http://www.wampserver.com/en/

and install it,after then add the security exception for Apache in Windows Firewall.

Now after installation :

Go to your browser and type localhost .Just only to make sure that you properly install and configured WAMP.(If localhost opens WAMP homepage in your browser it means you are ready to rock with your PC).

Now click on WAMP icon placed in taskbar like this and then click on www directory.

Copy your website content and pages in www directory,Example :I made a webpage and copied it in www directory.

Now go back to your browser and type localhost/mywebsite (replace mywebsite with your website page)in URL bar,You see your website like this :

Congrats your website is up and running.

But this is only works on LAN .

If you want to host it on WAN then you need a static ip(i.e. A static IP address is a number (in the form of a dotted quad) that is assigned to a computer by an Internet service provider (ISP) to be its permanent address on the Internet.).

Use your IP in URL bar instead of localhost then it will works on WAN means you can access your website anywhere in the world.
_________________________

Your website using your own home PC , hosting form your PC will give you little bit experience of how hosting services work.

You can try it for small website or personal work.

To run your PC as server there are lot of software but top most popular is WAMP server and XAMP server,Here i’m using WAMP server.

So,Let’s start our hosting :

Here I’m using WAMP server , you can download latest version form here

http://www.wampserver.com/en/

and install it,after then add the security exception for Apache in Windows Firewall.

Now after installation :

Go to your browser and type localhost .Just only to make sure that you properly install and configured WAMP.(If localhost opens WAMP homepage in your browser it means you are ready to rock with your PC).

Now click on WAMP icon placed in taskbar like this and then click on www directory.

Copy your website content and pages in www directory,Example :I made a webpage and copied it in www directory.

Now go back to your browser and type localhost/mywebsite (replace mywebsite with your website page)in URL bar,You see your website like this :

Congrats your website is up and running.

But this is only works on LAN .

If you want to host it on WAN then you need a static ip(i.e. A static IP address is a number (in the form of a dotted quad) that is assigned to a computer by an Internet service provider (ISP) to be its permanent address on the Internet.).

Use your IP in URL bar instead of localhost then it will works on WAN means you can access your website anywhere in the world.
_________________________

Changing or customize my computer drive icon
In this trick i will show you how to change the drive icons that appear in Mycomputer.

For this you need an icon image i.e.; with extension “ICO” example “drivea.ico”

Copy the icon file to the root of the drive.

example: c:drivea.ico

Then create a file called: autorun.inf in the root directory c:autorun.inf.

Simply Right click->New->Text Document. Rename it to autorun.inf (.inf is Extension)

Next open that file and type the following:

[autorun]
icon=drivea.ico

Save and close the file.

Now open my computer and refresh.. and woh! icon changed….

you can apply to other drives too.

Note:

“autorun.inf” and “ico.ico” must be in the root of the drive.

example: c:autorun.inf and c:drivea.ico.

same on the root.
_________________________

How to: The most secure way to encrypt and hide your files
Here, I am going to show you how to hide, encrypt and secure your data everywhere you go.

We will be using a free and open source tool called Truecrypt.

Truecrypt is an incredible software which does an extremely good job of encrypting your data.

Truecrypt encryption is thought to be unbreakable, even the FBI hackers can’t break it.

How to use truecrypt to encrypt your files and folders?

We will create a “file container” much like a secure vault. You can decide the size of this ‘vault’.

This vault is a single file and can have any extension and you can transfer it anywhere you like. You can open the vault by opening it with truecrypt and entering the password.

So, lets get started

1. Open truecrypt and click on Create Volume

2. Leave the default and Click next

3. Leave the default and click Next

4. Click Select File

5. Anywhere in your hard drive, just type any file name you want your container to be. Here its myfile.txt

Note that .txt is just an extension, and it doesn’t have any meaning in this regard. The idea is that people will think its a mere txt file.

6. Leave the default and Click next

7. Enter the desired size of the container and click next. I’ve made mine 3GB.

Note that you cannot change the size of the container afterwards.

8. Create a strong password for your container.

Note that the only way to crack truecrypt is to brute-force it. So, if your password is at least 15 or 20 characters with all the special characters etc, it should theoretically be impossible to break.

9. Move your mouse around a bit, and click Format. It may take some time depending on your CPU power. After the format is complete, close the window.

10. Next, click on any drive in the list. I’ve clicked drive L: After that, select the file we created earlier, myfile.txt. And finally click on Mount.

11. Once you press mount, it will ask for the password you set earlier. Click Ok and you are done.
_________________________

How to shutdown Pc with timer
Here is the trick!!

How To Make A Shutdown Timer!

********** METHOD 1 ***************

Right click on your desktop and choose “New=>shortcuts”.

In the box that says “Type the location of the shortcut”,

type in “shutdown -s -t 3600” without the quotation marks and click next. Note: 3600 are the amount of seconds before your computer shuts down. So , 60secs*60mins=3600secs.

Make up a name for the shortcut and you’re done.

You can change the icon by right clicking=>properities=>change icon=>browse

TO ABORT:

To make an abort key to stop the shutdown timer just create another shortcut and make

the “location of the shortcut” to ” shutdown -a” without the quotes.

********* METHOD 2 *************

Here is another trick to shutdown at a specific time, for example you wish to shutdown at 11:35am. Type this in

start=>Run
Type Code: at 11:35 shutdown -s

TO ABORT:
Code:shutdown -a
_________________________

How to enable copy paste in command prompt(CMD) – windows
By Default Windows do not allow users to Copy text and Paste it in Command prompt Or Copy text from Command prompt and paste it elsewhere.

But there is an option in CMD itself to enable Copy and Paste Text in Windows Command Prompt.

Step 1: Open CMD, Just type CMD in search or Press Win + X key to select Command Prompt.

Step 2: Right Click on the Title of the CMD window and Select Properties

Step 3: You will see a Pop up Window coming up, Now on the Right hand side, Under Edit Options, Just Check Quick Edit Mode and click OK

Step 4: Everything is Done, Now just Copy any Text from Here or Anywhere else Using CTRL + C keys and just Right click using your mouse on CMD.

You will see that the text is been pasted automatically in CMD. Please Understand that Using CTRL + C to Copy text is Important.
_________________________

Steps to manually setup Google DNS in windows pc
Step 1. First of all, in your windows PC go to the Control Panel and select Network and sharing center

Step 2. And there click on Change adapter settings.

Step 3. Now there you will see all networks, select the network that you want to configure for Google DNS. Now if you want to change ethernet settings then simply right-click onLocal Area Connection and then select Properties.

Step 4. Now click on Networking tab and there under This connection uses the following items select the option Internet Protocol Version 4 (TCP/IPv4) and then click on properties.

Step 5. Now choose the radio button Use the following DNS server addresses there and there will be written some default IP, simply clear them. Now there fill the value of google DNS value that is 8.8.8.8 OR 8.8.4.4 and then simply click on “OK” and then restart your network.

That’s it! you are done, now you are switched to google DNS server and observe the change in your internet speed which will be reasonable.
_________________________

How to copy text and images from a secured PDF file
1.) Take your secured PDF file from whom you want to copy the text and images , after that go to the site

http://www.extractpdf.com/

2.) Now as you can seen in the image above it have clearly written that you don’t required any registration and installation just go to the site upload your secured PDF file and then click on send file button.

Your PDF file start processing an you will get a simplified text and images extract from the your secured PDF file.

I hope it will easy for you to follow all my steps.
_________________________

How to create your own run commands
I hope you know what is run command ,if you don’t then it’s a command that you enter in the Run window to open a specific program.

I show you how to create your own run commands.

1.) Rename the shortcut name of your program to your desired name this name will be used to open it from Run.

2.)I have CCleaner shortcut on my screen and i have renamed it to different name (See image below).

3.)Now copy your modified shortcut to C:Windows. After Copying it Windows folder you can delete shortcut from the desktop (See image below).

4.)That’s it now enter your desired shortcut name to Run window to open your desired program name it sk.

Finally hit enter and your desired program will open.
_________________________

How to change system properties logo in windows 7
Windows 7 System Properties Logo Changer is a free portable tool that allows you to change your system properties logo in Windows 7.

How to use:

1. Run the tool as administrator. 2. Click on Select imageand browse for the image that you want to set as the System Properties Logo.

3. If you want to resize the image, click on Resize imageand specify the height & width of the image. After that, click Resize.

4. Click on Apply.

5. Click Check. Now the logo of System Properties will be changed.
_________________________

Create syskey before login screen in windows
You can give a password when windows starts. Nobody can hack this password.

If you are giving wrong password three time windows will restart. So it is powerful password

1- click on start

2- click on run

3- type syskey

4- enter

5- click on update

6- click on password startup

7- give a password

(dont forget the password,if password forget nobody can enter the system.)
_________________________

How to set up a backdoor in a windows
As the word says, backdoor is a hidden way to access a place.

In terms of computer backdoor means a way to access that system(network, pc or anything)through a unknown, hidden way making use of a vulnerability present in that system.

In windows 7:

1) Go to c:windowssystem32

2)Copy cmd.exe to desktop

3) Rename it as sethc.exe

You will get a dialogue box saying that you don’t have rights to move it in to system32 or for replacing sethc.exe the cmd.exe you should follow these sub-steps:

a)Right click on sethc.exe in system32

b)Open properties

c)Click on advanced in security tab

d)Click on owner

e)Click edit

f)Change owner from “trusted installer” to “administrator”

g)Click apply

h)Then go to ‘security’ tab in properties

i)Click edit

j)Click on ‘administrator’

k)Check the option enabling full control

l)Click on apply

4)Copy and paste the renamed .exe file to system32 again.

That’s all now just tap shift key 5 times and see the magic even at login time.

In future for accessing the pc on which you have done the above hack just do the following tap shift key times continuously and cmd opens.

just type the below code and you can enter the pc without a password(we have resetted it).

Type the following code:

Syntax: net user accountname *
and then change the password.
_________________________

How to ADD CONTROL PANEL TO THE RIGHT CLICK MENU OF THE DESKTOP.
STEPS:Open regedit.exe file.

Scroll down to create the following registry key:

[HKEY_CLASSES_ROOTDirectoryBackgroundshell]

In the left side pane, right click on the shell key and create a new key called Control Panel.

In the left side pane, right click on the Control Panel key and create a new key called command.

Under the command key, in the right pane double click on the (Default) string key and change its data to: rundll32.exe shell32.dll,Control_RunDLL

NOTE: Now when you right click on your desktop, a new menu item called Control Panel has been added to the context menu.
_________________________

Leave a Reply

Your email address will not be published. Required fields are marked *

Name *
Email *
Website

This site uses Akismet to reduce spam. Learn how your comment data is processed.

%d bloggers like this: